| | KEW 1061 | KEW 1062 |
| Detection mode | RMS | MEAN/RMS (switch) |
| DC V |
50.000/500.00/2400.0mV/5.0000/50.000/500.00/1000.0V
(Input impedance: Approx. 100MΩ [50/500/2400mV], 10MΩ [5/50/500/1000V])
|±0.02%rdg±2dgt (Basic accuracy)
|
| AC V [RMS] |
50.000/500.00mV/5.0000/50.000/500.00/1000.0V
(Input impedance: 11MΩ<50pF [50/500mV/5V], 10MΩ<50pF [50/500/1000V])
-------------------------------------------------------------------------------------------------------
±0.7%rdg±30dgt (Basic accuracy) | ±0.4%rdg±30dgt (Basic accuracy)
|
| AC V [MEAN] * |
-- |
50.000/500.00mV/ 5.0000/50.000/500.00/1000.0V
(Input impedance:
11MΩ<50pF [50/500mV/5V],
10MΩ<50pF [50/500/1000V])
|±1%rdg±30dgt (Basic accuracy)
|
| DCV+ACV |
5.0000/50.000/500.00/1000.0V
(Input impedance: 11MΩ<50pF [5V], 10MΩ<50pF [50/500/1000V])
-------------------------------------------------------------------------------------------------------
±1%rdg±10dgt (Basic accuracy) | |±0.5%rdg±10dgt (Basic accuracy)
|
| DC A |
500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
|±0.2%rdg±5dgt (Basic accuracy)
|
| AC A [RMS] |
500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
-------------------------------------------------------------------------------------------------------
|±1%rdg±20dgt (Basic accuracy) | |±0.75%rdg±20dgt |(Basic accuracy))
|
| AC A [MEAN] * |
-- |
500.00/5000.0µA/50.000/500.00mA/ 5.0000/10.000A
|±1.5%rdg±20dgt (Basic accuracy)
|
| DCA+ACA |
500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
-------------------------------------------------------------------------------------------------------
±1.5%rdg±10dgt (Basic accuracy) | |±1%rdg±10dgt (Basic accuracy))
|
| Ω |
500.00Ω/5.0000/50.000/500.00kΩ/5.0000/50.000MΩ
-------------------------------------------------------------------------------------------------------
±0.1%rdg±2dgt (Basic accuracy) | ±0.05%rdg±2dgt (Basic accuracy))
|
| LowPower-Ω * |
-- |
5.000/50.00/500.0kΩ/5.000MΩ
|±0.2%rdg±3dgt (Basic accuracy)
|
| Continuity buzzer |
500.0Ω (The buzzer turns on for resistances lower than 100±50Ω) |
| Diode test |
2.4000V|±1%rdg±2dgt
Open curcuit voltage: <5V (Approx. 0.5mA Measuring Current)
|
| Capacitance |
5.000/50.00/500.0nF/5.000/50.00/500.0µF/5.000/50.00mF
|±1%rdg±5dgt (Basic accuracy)
|
| Frequency |
2.000~9.999/9.00~99.99/90.0~999.9Hz/0.900~9.999/9.00~99.99kHz
|±0.02%rdg±1dgt (Basic accuracy)
|
| DUTY |
10~90%|±1%rdg |
| Temperature |
-200~1372ºC|±1%rdg±1.5ºC
-328~2501.6ºF|±1%rdg±2.0ºF
(with the use of K-type Temperature probe)
|
|
Measurement
functions
|
DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature, Capacitor, Duty cycle ratio, Decibel (dBV, dBm), Continuity Check, Diode Test, LowPower-Ω * |
| Other functions |
Data Hold (D/H), Auto Hold (A/H), Peak Hold * (P/H), Range Hold (R/H), Maximum value (MAX), Minimum value (MIN), Average value (AVG), Zero Adjustment (Capacitor, Resistance), Relative values, Save to Memory, LCD backlight |
| Withstand voltage |
6,880V/5 sec. |
| Applicable standards |
IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution degree 2,
IEC 61010-031, IEC 61326-1 (EMC)
|
| Power source |
R6P (1.5V)×4 (Auto power off: approx. 20 minutes) |
| Dimensions |
192(L)×90(W)×49(D) mm |
| Weight |
Approx. 560g (including batteries) |
| Accessories |
7220A (Test leads), R6P×4, Instruction manual,
8926 (Fuse [440mA/1000V])×1 (included)
8927 (Fuse [10A/1000V])×1 (included)
|